Wellmax 4-Pack Stake Pocket D Rings - Heavy Duty 5/8" Trailer Tie Down Anchors for Utility & Flatbed Trailers - 18,000 LBS Break Strength Removable D Ring with Hitch Pins & Anti-Loss Wire

Add reliable, heavy-rated tie-down points anywhere on your flatbed, utility trailer, or car hauler — without welding, drilling, or permanent modification. The Wellmax 5/8" Stake Pocket D-Ring 4-Pack gives you professional-grade anchor points exactly where your load needs them. Instant, adjustable tie-downs. Stop struggling with factory anchors that sit in the wrong spot or rattle loose in your trailer pockets. These drop-in stake pocket D-rings feature 4 precision-drilled pin holes along the shaft so you can set the exact installation height for a snug, rattle-free fit across different pocket depths. Slide them in, choose your pin hole, insert the included anti-loss steel cable hitch pin, and your tie-down point is ready. Engineered for the heaviest loads. Built for commercial landscapers, heavy contractors, and off-road enthusiasts, these forged 5/8" solid steel anchors are rated at 6,000 lb Working Load Limit (WLL) with 18,000 lb Minimum Breaking Strength (MBS). Whether you are locking down an excavator with chain binders or securing a heavy rig with wheel nets, these anchors hold position under full tension without deformation. Weather-resistant durability, high-visibility design. The powder-coated finish resists rain, mud, and road salt to prevent rust and corrosion in all conditions. The high-visibility red D-ring stands out against dark trailer beds and stays easy to locate in low-light job site conditions — so setup is fast even when visibility is poor. What's included: 4 x 5/8" stake pocket D-ring anchors (red forged steel) 4 x 1/2" hitch pins with braided steel anti-loss cable 4 x cotter pins for secure hitch pin retention

• MAXIMUM HAULING STRENGTH — 6,000 lb WLL / 18,000 lb MBS: Secure heavy industrial loads with total confidence. Each 5/8" stake pocket D-ring is rated at 6,000 lb Working Load Limit and 18,000 lb Minimum Breaking Strength — built for tying down tractors, skid steers, excavators, and heavy machinery on flatbed and utility trailers.
• 4 PIN HOLES FOR A PERFECT FIT — STOP THE RATTLE: These drop-in trailer tie down anchors feature 4 precision-drilled pin holes along the shaft, allowing you to adjust pin placement for a snug, rattle-free fit across varying stake pocket depths. Stays locked whether you are hauling a full load or running empty.
• UNIVERSAL TRAILER COMPATIBILITY — DROP IN AND GO: Fits standard stake pocket slots on flatbed trailers, car hauler trailers, gooseneck trailers, and open-deck utility trailers. No welding, cutting, or permanent modification required — insert the anchor, set the pin, and your tie-down point is ready. Relocate between pockets in seconds to match any load footprint.
• COMPLETE 4-PACK KIT — NOTHING GETS LOST: Includes four 5/8" stake pocket D-ring anchors, four 1/2" hitch pins, and four cotter pins — all pre-attached to a braided steel anti-loss cable so you never drop or lose your hardware on the job site. Everything you need is in the box and stays together between uses.
• BUILT TOUGH AND RUST RESISTANT — HIGH-VISIBILITY RED FINISH: Forged from solid 5/8" steel with a powder-coated anti-rust finish that stands up to road grime, rain, and outdoor exposure. The high-visibility red D-ring and red-coated hitch pins are easy to spot on a loaded trailer — and built to handle the same punishment as the load they are securing.